Point systemd service at correct script location

Add OpenRC support

.gitignore

@@ -29,7 +29,7 @@ wheels/
 #  Usually these files are written by a python script from a template
 #  before PyInstaller builds the exe, so as to inject date/other infos into it.
 *.manifest
-#*.spec
+*.spec
 
 # Installer logs
 pip-log.txt

README.md

@@ -7,7 +7,7 @@ On systems where the EC doesn't reset the values (ex: ASUS Zenbook UX430UNR), th
 
 ### Tested hardware
 Other users have confirmed that the tool is also working for these laptops:
-- Lenovo T480, T480s, X1C5, X1C6, T580, L480, T470, X280, ThinkPad Anniversary Edition 25, E590 w/ RX 550X, P43s, E480, E580
+- Lenovo T480, T480s, X1C5, X1C6, T580, L490, L480, T470, X280, ThinkPad Anniversary Edition 25, E590 w/ RX 550X, P43s, E480, E580
 - Dell XPS 9365, 9370, Latitude 7390 2-in-1
 - Microsoft Surface Book 2
 
@@ -24,7 +24,7 @@ The tool supports **undervolting** the CPU by configuring voltage offsets for CP
 The tool now supports overriding the **IccMax** by configuring the maximum allowed current for CPU, cache and GPU planes. The tool will re-apply IccMax on resume from standby and hibernate. You can now either use the `ICCMAX` key in config to set global values or the `ICCMAX.AC` and `ICCMAX.BATTERY` keys to selectively set current values for the two power profiles. **NOTE:** the values specified in the config file are the actual current limit of your system, so those are not a offset from the default values as for the undervolt. As such, you should first find your system default values with the `--monitor` command. 
 
 ### HWP override (EXPERIMENTAL)
-I have found that under load my CPU was not always hitting max turbo frequency, in particular when using one/two cores only. For instance, when running [prime95](https://www.mersenne.org/download/) (1 core, test #1) my CPU is limited to about 3500 MHz over the theoretical 4000 MHz maximum. The reason is the value for the HWP energy performance [hints](http://manpages.ubuntu.com/manpages/artful/man8/x86_energy_perf_policy.8.html). By default TLP sets this value to `balance_performance` on AC in order to reduce the power consumption/heat in idle. By setting this value to `performance` I was able to reach 3900 MHz in the prime95 single core test, achieving a +400 MHz boost. Since this value forces the CPU to full speed even during idle, a new experimental feature allows to automatically set HWP to performance under load and revert it to balanced when idle. This feature can be enabled (in AC mode *only*) by setting to `True` the `HWP_Mode` parameter in the lenovo_fix config file : https://github.com/erpalma/throttled/blob/master/etc/lenovo_fix.conf#L39 .
+I have found that under load my CPU was not always hitting max turbo frequency, in particular when using one/two cores only. For instance, when running [prime95](https://www.mersenne.org/download/) (1 core, test #1) my CPU is limited to about 3500 MHz over the theoretical 4000 MHz maximum. The reason is the value for the HWP energy performance [hints](http://manpages.ubuntu.com/manpages/artful/man8/x86_energy_perf_policy.8.html). By default TLP sets this value to `balance_performance` on AC in order to reduce the power consumption/heat in idle. By setting this value to `performance` I was able to reach 3900 MHz in the prime95 single core test, achieving a +400 MHz boost. Since this value forces the CPU to full speed even during idle, a new experimental feature allows to automatically set HWP to performance under load and revert it to balanced when idle. This feature can be enabled (in AC mode *only*) by setting to `True` the `HWP_Mode` parameter in the lenovo_fix config file : https://github.com/erpalma/throttled/blob/master/etc/lenovo_fix.conf#L41 .
 
 I have run **[Geekbench 4](https://browser.geekbench.com/v4/cpu/8656840)** and now I can get a score of 5391/17265! On `balance_performance` I can reach only 4672/16129, so **15% improvement** in single core and 7% in multicore, not bad ;)
 
@@ -35,7 +35,16 @@ On a lot of modern CPUs from Intel one can configure the TDP up or down based on
 A stripped down version of the python module `python-periphery` is now built-in and it is used for accessing the MCHBAR register by memory mapped I/O. You also need `dbus` and `gobject` python bindings for listening to dbus signals on resume from sleep/hibernate.
 
 ### Writing to MSR and PCI BAR
-Right now it is mandatory to **disable Secure Boot** (in BIOS) in order to avoid [Kernel Lockdown](https://lwn.net/Articles/706637/). In particular Lockdown restricts access to MSR and PCI BAR (via /dev/mem) which are required by this tool.
+Some time ago a feature called [Kernel Lockdown](https://lwn.net/Articles/706637/) was added to Linux. Kernel Lockdown automatically enables some security measures when Secure Boot is enabled, among them restricted access to MSR and PCI BAR via /dev/mem, which this tool requires. There are two ways to get around this: You can either disable Secure Boot in your firmware settings, or disable the Kernel Lockdown LSM.
+
+The LSM can be disabled this way: Check the contents of the file `/sys/kernel/security/lsm` (example contents: `capability,lockdown,yama`). Take the contents of the file, remove `lockdown` and add the rest as a kernel parameter, like this: `lsm=capability,yama`. Reboot and Kernel Lockdown will be disabled!
+
+As of Linux 5.9, kernel messages will be logged whenever the script writes to MSR registers. These aren't a problem for now, but there's some indication that future kernels may restrict MSR writes from userspace by default. This is being tracked by issue #215. The messages will look something like:
+```
+[  324.833543] msr: Write to unrecognized MSR 0x1a2 by python3
+               Please report to x86@kernel.org
+```
+
 Note that some kernels (e.g. [linux-hardened](https://www.archlinux.org/packages/extra/x86_64/linux-hardened/)) will prevent from writing to `/dev/mem` too. Specifically, you need a kernel with `CONFIG_DEVMEM` and `CONFIG_X86_MSR` set.
 
 ### Thermald
@@ -53,11 +62,18 @@ sudo systemctl enable --now lenovo_fix.service
 ```
 Thanks to *felixonmars* for creating and maintaining this package.
 
+### Artix Linux
+```
+makepkg -si
+sudo rc-update add lenovo_fix default
+sudo rc-service lenovo_fix start
+```
+
 ### Debian/Ubuntu
 ```
 sudo apt install git build-essential python3-dev libdbus-glib-1-dev libgirepository1.0-dev libcairo2-dev python3-venv python3-wheel
-git clone https://github.com/erpalma/lenovo-throttling-fix.git
+git clone https://github.com/erpalma/throttled.git
-sudo ./lenovo-throttling-fix/install.sh
+sudo ./throttled/install.sh
 ```
 If you own a X1C6 you can also check a tutorial for Ubuntu 18.04 [here](https://mensfeld.pl/2018/05/lenovo-thinkpad-x1-carbon-6th-gen-2018-ubuntu-18-04-tweaks/).
 
@@ -83,8 +99,8 @@ sudo systemctl enable --now throttled
 If you prefer to install from source, you can use the following commands.
 ```
 sudo dnf install python3-cairo-devel cairo-gobject-devel gobject-introspection-devel dbus-glib-devel python3-devel make libX11-devel
-git clone https://github.com/erpalma/lenovo-throttling-fix.git
+git clone https://github.com/erpalma/throttled.git
-sudo ./lenovo-throttling-fix/install.sh
+sudo ./throttled/install.sh
 ```
 Feedback about Fedora installation is welcome.
 
@@ -92,8 +108,8 @@ Feedback about Fedora installation is welcome.
 User *brycecordill* reported that the following dependencies are required for installing in openSUSE, tested on openSUSE 15.0 Leap.
 ```
 sudo zypper install gcc make python3-devel dbus-1-glib-devel python3-cairo-devel cairo-devel python3-gobject-cairo gobject-introspection-devel
-git clone https://github.com/erpalma/lenovo-throttling-fix.git
+git clone https://github.com/erpalma/throttled.git
-sudo ./lenovo-throttling-fix/install.sh
+sudo ./throttled/install.sh
 ```
 
 ### Gentoo
@@ -105,6 +121,14 @@ systemctl enable throttled.service
 systemctl start throttled.service
 ```
 
+### Solus
+```
+sudo eopkg it -c system.devel
+sudo eopkg it git python3-devel dbus-glib-devel python3-cairo-devel libcairo-devel python3-gobject-devel
+git clone https://github.com/erpalma/throttled.git
+sudo ./throttled/install.sh
+```
+
 ### Void
 
 The installation itself will create a runit service as lenovo_fix, enable it and start it. Before installation, make sure dbus is running `sv up dbus`.
@@ -112,9 +136,9 @@ The installation itself will create a runit service as lenovo_fix, enable it and
 ```
 sudo xbps-install -Sy gcc git python3-devel dbus-glib-devel libgirepository-devel cairo-devel python3-wheel pkg-config make
 
-git clone https://github.com/erpalma/lenovo-throttling-fix.git
+git clone https://github.com/erpalma/throttled.git
 
-sudo ./lenovo-throttling-fix/install.sh
+sudo ./throttled/install.sh
 ```
 
 ### Uninstall
@@ -130,6 +154,12 @@ sv down lenovo_fix
 rm /var/service/lenovo_fix
 ```
 
+If you're using OpenRC instead of systemd:
+```
+rc-service lenovo_fix stop
+rc-update del lenovo_fix default
+```
+
 If you also need to remove the tool from the system:
 ```
 rm -rf /opt/lenovo_fix /etc/systemd/system/lenovo_fix.service
@@ -141,10 +171,11 @@ On Arch you should probably use `pacman -R lenovo-throttling-fix-git` instead.
 ### Update
 If you update the tool you should manually check your config file for changes or additional features and modify it accordingly. The update process is then as simple as:
 ```
-cd lenovo-throttling-fix
+cd throttled
 git pull
 sudo ./install.sh
 sudo systemctl restart lenovo_fix.service
+OpenRC: sudo rc-service lenovo_fix restart
 ```
 
 ## Configuration
@@ -267,5 +298,18 @@ This is an example output:
 .....
 ```
 
+## Autoreload
+Auto reload config on changes (unless it's deleted) can be enabled/disabled in the config
+ 
+```
+[General]
+Autoreload = True
+```
+
+## A word about manufacturer provided tooling
+Tools provided by your notebook manufacturer like [Dell Power Manager](https://www.dell.com/support/contents/us/en/04/article/product-support/self-support-knowledgebase/software-and-downloads/dell-power-manager) tend to persist their settings to the system board. If you ever had it running under Windows and activated a cool/quiet/silent/saving profile, this setting will still be active when running linux, throttling your system.
+
+> On my Dell Latitude 5591, not even a BIOS reset to manufacturar default killed the active `Quiet` profile
+
 ## Disclaimer
 This script overrides the default values set by Lenovo. I'm using it without any problem, but it is still experimental so use it at your own risk.

etc/lenovo_fix.conf

@@ -3,6 +3,8 @@
 Enabled: True
 # SYSFS path for checking if the system is running on AC power
 Sysfs_Power_Path: /sys/class/power_supply/AC*/online
+# Auto reload config on changes
+Autoreload: True
 
 ## Settings to apply while connected to Battery power
 [BATTERY]
@@ -44,6 +46,7 @@ cTDP: 0
 # Disable BDPROCHOT (EXPERIMENTAL)
 Disable_BDPROCHOT: False
 
+# All voltage values are expressed in mV and *MUST* be negative (i.e. undervolt)! 
 [UNDERVOLT.BATTERY]
 # CPU core voltage offset (mV)
 CORE: 0
@@ -56,6 +59,7 @@ UNCORE: 0
 # Analog I/O voltage offset (mV)
 ANALOGIO: 0
 
+# All voltage values are expressed in mV and *MUST* be negative (i.e. undervolt)!
 [UNDERVOLT.AC]
 # CPU core voltage offset (mV)
 CORE: 0

install.sh

@@ -6,6 +6,8 @@ if pidof systemd 2>&1 1>/dev/null; then
     systemctl stop lenovo_fix.service >/dev/null 2>&1
 elif pidof runit 2>&1 1>/dev/null; then
     sv down lenovo_fix >/dev/null 2>&1
+elif pidof openrc 2>&1 1>/dev/null; then
+    rc-service lenovo_fix stop >/dev/null 2>&1
 fi
 
 mkdir -p "$INSTALL_DIR" >/dev/null 2>&1
@@ -26,6 +28,10 @@ if pidof systemd 2>&1 1>/dev/null; then
 elif pidof runit 2>&1 1>/dev/null; then
     echo "Copying runit service file"
     cp -R runit/lenovo_fix /etc/sv/
+elif pidof openrc-init 2>&1 1>/dev/null; then
+    echo "Copying OpenRC service file"
+    cp -R openrc/lenovo_fix /etc/init.d/lenovo_fix
+    chmod 755 /etc/init.d/lenovo_fix
 fi
 
 echo "Building virtualenv..."
@@ -33,6 +39,7 @@ cp -n requirements.txt lenovo_fix.py mmio.py "$INSTALL_DIR"
 cd "$INSTALL_DIR"
 /usr/bin/python3 -m venv venv
 . venv/bin/activate
+pip install wheel
 pip install -r requirements.txt
 
 if pidof systemd 2>&1 1>/dev/null; then
@@ -44,6 +51,10 @@ elif pidof runit 2>&1 1>/dev/null; then
     echo "Enabling and starting runit service..."
     ln -sv /etc/sv/lenovo_fix /var/service/
     sv up lenovo_fix
+elif pidof openrc-init 2>&1 1>/dev/null; then
+    echo "Enabling and starting OpenRC service..."
+    rc-update add lenovo_fix default
+    rc-service lenovo_fix start
 fi
 
 echo "All done."

lenovo_fix.py

@@ -30,7 +30,8 @@ TRIP_TEMP_RANGE = [40, 97]
 UNDERVOLT_KEYS = ('UNDERVOLT', 'UNDERVOLT.AC', 'UNDERVOLT.BATTERY')
 ICCMAX_KEYS = ('ICCMAX', 'ICCMAX.AC', 'ICCMAX.BATTERY')
 power = {'source': None, 'method': 'polling'}
-HWP_VALUE = 0x20
+HWP_PERFORMANCE_VALUE = 0x20
+HWP_DEFAULT_VALUE = 0x80
 HWP_INTERVAL = 60
 
 
@@ -77,6 +78,7 @@ supported_cpus = {
     'Kaby Lake (R)': (0x8E, 0x9E),
     'Coffee Lake': (0x9E,),
     'Cannon Lake': (0x66,),
+    'Comet Lake': (0xA5, 0xA6),
 }
 
 
@@ -516,22 +518,23 @@ def calc_reg_values(platform_info, config):
     return regs
 
 
-def set_hwp():
+def set_hwp(performance_mode):
     # set HWP energy performance preference
     cur_val = readmsr(0x774, cpu=0)
-    new_val = (cur_val & 0xFFFFFFFF00FFFFFF) | (HWP_VALUE << 24)
+    hwp_mode = HWP_PERFORMANCE_VALUE if performance_mode else HWP_DEFAULT_VALUE
+    new_val = (cur_val & 0xFFFFFFFF00FFFFFF) | (hwp_mode << 24)
 
     writemsr(0x774, new_val)
     if args.debug:
         read_value = readmsr(0x774, from_bit=24, to_bit=31)[0]
-        match = OK if HWP_VALUE == read_value else ERR
+        match = OK if hwp_mode == read_value else ERR
-        log('[D] HWP - write "{:#02x}" - read "{:#02x}" - match {}'.format(HWP_VALUE, read_value, match))
+        log('[D] HWP - write "{:#02x}" - read "{:#02x}" - match {}'.format(hwp_mode, read_value, match))
 
 
 def set_disable_bdprochot():
     # Disable BDPROCHOT
-    cur_val = readmsr(0x1FC,flatten=True)
+    cur_val = readmsr(0x1FC, flatten=True)
-    new_val = (cur_val & 0xFFFFFFFFFFFFFFFE)
+    new_val = cur_val & 0xFFFFFFFFFFFFFFFE
 
     writemsr(0x1FC, new_val)
     if args.debug:
@@ -540,6 +543,23 @@ def set_disable_bdprochot():
         log('[D] BDPROCHOT - write "{:#02x}" - read "{:#02x}" - match {}'.format(0, read_value, match))
 
 
+def get_config_write_time():
+    try:
+        return os.stat(args.config).st_mtime
+    except FileNotFoundError:
+        return None
+
+
+def reload_config():
+    config = load_config()
+    regs = calc_reg_values(get_cpu_platform_info(), config)
+    undervolt(config)
+    set_icc_max(config)
+    set_hwp(config.getboolean('AC', 'HWP_Mode', fallback=False))
+    log('[I] Reloading changes.')
+    return config, regs
+
+
 def power_thread(config, regs, exit_event):
     try:
         mchbar_mmio = MMIO(0xFED159A0, 8)
@@ -549,6 +569,8 @@ def power_thread(config, regs, exit_event):
         mchbar_mmio = None
 
     next_hwp_write = 0
+    last_config_write_time = get_config_write_time() \
+        if config.getboolean('GENERAL', 'Autoreload', fallback=False) else None
     while not exit_event.is_set():
         # log thermal status
         if args.debug:
@@ -557,6 +579,13 @@ def power_thread(config, regs, exit_event):
                 for key, value in core_thermal_status.items():
                     log('[D] core {} thermal status: {} = {}'.format(index, key.replace("_", " "), value))
 
+        # Reload config on changes (unless it's deleted)
+        if config.getboolean('GENERAL', 'Autoreload', fallback=False):
+            config_write_time = get_config_write_time()
+            if config_write_time and last_config_write_time != config_write_time:
+                last_config_write_time = config_write_time
+                config, regs = reload_config()
+
         # switch back to sysfs polling
         if power['method'] == 'polling':
             power['source'] = 'BATTERY' if is_on_battery(config) else 'AC'
@@ -627,7 +656,7 @@ def power_thread(config, regs, exit_event):
                 or (power['method'] == 'polling' and not is_on_battery(config))
             )
         ):
-            set_hwp()
+            set_hwp(enable_hwp_mode)
             next_hwp_write = time() + HWP_INTERVAL
 
         else:
@@ -787,16 +816,18 @@ def main():
     regs = calc_reg_values(platform_info, config)
 
     if not config.getboolean('GENERAL', 'Enabled'):
+        log('[I] Throttled is disabled in config file... Quitting. :(')
         return
 
+    undervolt(config)
+    set_icc_max(config)
+    set_hwp(config.getboolean('AC', 'HWP_Mode', fallback=False))
+
     exit_event = Event()
     thread = Thread(target=power_thread, args=(config, regs, exit_event))
     thread.daemon = True
     thread.start()
 
-    undervolt(config)
-    set_icc_max(config)
-
     # handle dbus events for applying undervolt/IccMax on resume from sleep/hybernate
     def handle_sleep_callback(sleeping):
         if not sleeping:

openrc/lenovo_fix

@@ -0,0 +1,5 @@
+#!/usr/bin/openrc-run
+command="env python3 /usr/lib/throttled/lenovo_fix.py"
+pidfile=${pidfile-/var/run/lenovo_fix.pid}
+description="Stop Intel throttling"
+command_background="yes"

package/PKGBUILD

@@ -0,0 +1,31 @@
+
+pkgname=throttled
+pkgver=0.6
+pkgrel=4
+pkgdesc="Workaround for Intel throttling issues in Linux."
+arch=('any')
+url="https://github.com/erpalma/throttled"
+license=('MIT')
+depends=('python-dbus' 'python-psutil' 'python-gobject')
+conflicts=('lenovo-throttling-fix-git' 'lenovo-throttling-fix')
+replaces=('lenovo-throttling-fix')
+backup=('etc/lenovo_fix.conf')
+source=("git+https://github.com/Hyper-KVM/throttled.git#branch=openrc")
+sha256sums=('SKIP')
+
+
+build() {
+  cd "${srcdir}/throttled/"
+  python -m compileall *.py
+}
+
+package() {
+  cd "${srcdir}/throttled/"
+  install -Dm644 etc/lenovo_fix.conf "$pkgdir"/etc/lenovo_fix.conf
+  install -Dm644 systemd/lenovo_fix.service "$pkgdir"/usr/lib/systemd/system/lenovo_fix.service
+  install -Dm755 lenovo_fix.py "$pkgdir"/usr/lib/$pkgname/lenovo_fix.py
+  install -Dm755 openrc/lenovo_fix "$pkgdir/etc/init.d/lenovo_fix"
+  install -Dm755 mmio.py "$pkgdir"/usr/lib/$pkgname/mmio.py
+  cp -a __pycache__ "$pkgdir"/usr/lib/$pkgname/
+  install -Dm644 LICENSE "$pkgdir"/usr/share/licenses/$pkgname/LICENSE
+}

requirements.txt

@@ -1,3 +1,3 @@
-configparser==3.8.1
+configparser==5.0.0
-dbus-python==1.2.8
+dbus-python==1.2.16
-PyGObject==3.32.2
+PyGObject==3.38.0

systemd/lenovo_fix.service

@@ -6,8 +6,6 @@ Type=simple
 ExecStart=/usr/bin/throttled --conf /etc/throttled.conf
 # Setting PYTHONUNBUFFERED is necessary to see the output of this service in the journal
 Environment=PYTHONUNBUFFERED=1
-StandardOutput=syslog
-StandardError=syslog
 
 [Install]
 WantedBy=multi-user.target

throttled.spec

@@ -2,7 +2,7 @@
 %define debug_package %{nil}
 
 Name:     throttled
-Version:  0.6
+Version:  0.8
 Release:  2
 Summary:  Workaround for Intel throttling issues in Linux
 License:  MIT
@@ -14,7 +14,7 @@ BuildRequires: systemd-units
 
 Requires: python3
 Requires: python3-gobject
-Requires: python3-configparser
+# Requires: python3-configparser # Not available in F33, install using pip instead
 Requires: systemd
 
 Conflicts: thermald